Hello, welcome to the website of Henan Dashan Nonferrous Metals Co., Ltd.!
Henan Dashan Nonferrous Metal Co., Ltd.
bronze bushings

NEWScurrent location:首页 >> NEWS

  • Does the self-lubrication of graphite copper sleeve diminish over time?
    26
    2024-11

    Does the self-lubrication of graphite copper sleeve diminish over time?

    Under normal working conditionsUnder normal working environment and working conditions, the self-lubrication of graphite copper sleeve will not be significantly weakened. This is because the graphite ···

  • Which filler weld repair method is better for graphite copper bushings after wear?
    25
    2024-11

    Which filler weld repair method is better for graphite copper bushings after wear?

    Argon arc welding repair methodPrinciple:Argon arc welding is an arc welding method that uses argon gas as a protective gas. When repairing graphite copper bushings, argon gas can effectively isolate ···

  • What is the difference between H59 brass and H62 brass?
    22
    2024-11

    What is the difference between H59 brass and H62 brass?

    Chemical compositionH59 brass: copper content of 57.0% - 60.0%, zinc is the balance, also contains a small amount of lead (≤ 0.5%), phosphorus (≤ 0.01%), iron (≤ 0.3%), antimony (≤ 0.01%), bismuth···

  • What is the temperature range for copper bushing lubricants?
    21
    2024-11

    What is the temperature range for copper bushing lubricants?

    Low Temperature RangeGenerally speaking, a good quality copper bushing lubricant will maintain good performance at low temperatures down to - 40°C or even lower. This depends mainly on the base oil c···

  • The role and types of copper bushing in cone crushers
    20
    2024-11

    The role and types of copper bushing in cone crushers

    The role of copper bushingSupporting role: In the cone crusher, copper sleeve is an important supporting part. For example, the eccentric copper bushing supports the eccentric bushing so that it can r···

  • How is the cause of copper bushing burnout related to shaft wear?
    19
    2024-11

    How is the cause of copper bushing burnout related to shaft wear?

    Worn shafts lead to burnt copper bushingIncreased coefficient of friction: When the shaft is worn, the roughness of its surface may increase. The coefficient of friction between the shaft and the copp···

  • What is the service life of aluminum bronze bronze bushings with better wear resistance?
    18
    2024-11

    What is the service life of aluminum bronze bronze bushings with better wear resistance?

    The service life of aluminum bronzebronze bushings with better wear resistance is affected by a variety of factors, so it is difficult to give an exact fixed life, the following is a general analysis ···

  • How to choose the right lubricant to minimize copper bushing wear?
    14
    2024-11

    How to choose the right lubricant to minimize copper bushing wear?

    Consider the working environmentTemperature factorsIn high-temperature environments (e.g., copper bushings in metallurgical equipment, where operating temperatures may exceed 200°C), a lubricant that···

  • Links:

    Copyright © 2022    

    Address:No.16,2nd Floor,Unit 2,Building 1,Geohome,at the intersection of Yushinan Road,Science Avenue,Zhengzhou High-tech Industrial Development Zone       Telephone:+86 17719955658

    Boss:Han         cell phone:+86 17719955658